SUZ-2
Pro Tips!!!
-Make sure all tires are inflated to door placard suggested.
-Be sure ALL other sensors are out of range of vehicle antenna, (10 ft range min).
-Disable all other WiFi/Bluetooth and electronic accessory devices**.
**Includes HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position (engine off)
3. Press and hold down drivers side door switch for 2 seconds. Release then press again for 2 seconds. Release, then press again for 5 seconds.
4. Place learn tool over LF tire and press activate/test button, then proceed to RF, RR, and LR. Sensors must be activated within 90 seconds.
5. When each sensor ID has been received by control module TPMS telltale symbol will be displayed for 5 seconds.