SUZ-3
Pro Tips!!!
-Make sure all tires are inflated to door placard suggested.
-Be sure ALL other sensors are out of range of vehicle antenna, (10 ft range min).
-Disable all other WiFi/Bluetooth and electronic accessory devices**.
**Includes HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
1. If equipped with standard key entry system, turn ignition to the ON position, then proceed to step 4.
2. If equipped with keyless entry system, turn ignition to the ACC position.
3. Using keyless entry system, hold lock and unlock buttons simultaneously until horn sounds, and then LF turn signal will become illuminated, proceed to step 5.
4. Using DIC: press and release INFO button until TIRE LEARN message is indicated on display. Hold down SET/RESET button until horn sounds and LF turn signal is illuminated.
5. Starting with LF tire, increase/decrease tire pressure until horn sounds.
6. After horn sounds proceed as in step 5 for the next 4 sensors in the following order: RF, RR, LF. After completed LR tire, horn will sound twice.
7. Turn ignition to OFF position to exit vehicle learn mode. Adjust all tires to pressure listed on tire placard.
