GM-13
Pro Tips!!!
-Make sure all tires are inflated to door placard suggested.
-Be sure ALL other sensors are out of range of vehicle antenna, (10 ft range min).
-Disable all other WiFi/Bluetooth and electronic accessory devices**.
**Includes HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
** This Relearn method might require the use of a relearn magnet.**
*A TPMS scan tool will be needed
1. Inflate all tires to pressure indicated on tire placard.
2. Make sure the vehicle has been parked for at least 2 minutes before proceeding. Read all sensor IDs using tool
3. Turn the ignition switch to the ON position (engine off).
4. Press the RESET button the the Driver Information Center (DIC) to clear any warning messages displayed on the Instrument Panel Cluster (IPC).
5. Press and release the OPTIONS button on the DIC until the IPC display is blank.
6. Press and hold the RESET button on the DIC for three seconds.
7. Press and release the OPTIONS button again until the message TIRE TRAINING appears on the IPC.
8. Press and release the RESET button until the message LEARN L FRONT TIRE is displayed.
9. Starting at the LF tire, place relearn magnet over valve stem until horn sounds.
10. After horn chirp has sounded, proceed as in step 8 for the next three sensors in the following order: RF, RR, LR.
11. Drive at 12MPH for up to 5 minutes.